Serving the Charleston area  ·  (843) 804-4445  ·  Open Mon-Sun 7am-7pm
📞 (843) 804-4445 Free Quote

Metal Roofing in Ravenel, SC (29470) · Local Professionals

Charleston Metal Roofing · Fast response in Ravenel and the Charleston area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+196Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Ravenel is a small Lowcountry town where the lots are wide, the ground is flat, and most homes sit on brick piers or slabs under a canopy of pines and live oaks. You will see a lot of 1970s to 1990s brick ranches and single-story farmhouses along Highway 165 and Parkers Ferry Road, plus a growing number of newer builds tucked off the side roads toward the Edisto River. Metal roofs have always made sense here, and they still do.

Homeowners in Ravenel (29470) call Charleston Metal Roofing because we understand the specific mix of salt air, summer storms, and flat, poorly draining ground that chews up ordinary roofs. Whether you are off Savannah Highway near the Ravenel Depot or out on a larger tract near the Charleston Speedway, we can give you a straight answer on repair versus replacement.

Metal Roofing in Ravenel (29470)

Ravenel sits on flat Lowcountry ground with a high water table, and that changes how roofing work gets done. Many properties here are on septic and well, with drainage swales that can back up during a heavy afternoon thunderstorm. We pay attention to where the water goes, not just the roof itself. A lot of the housing stock is older single-story brick ranches and farmhouse-style homes with low-slope porches and carports, so corrugated and ribbed panel roofing is a common and practical choice. Those same homes often have mature loblolly pines close enough to drop limbs and fill valleys with needles, which is why we see so many failed fasteners and pulled flashing on older metal roofs. Access is usually easy on these larger lots, but we still plan for tight driveways and detached shops or barns that need the same treatment as the house.

Our team has worked across Ravenel and the surrounding Charleston area long enough to know which panel profiles hold up to the wind-driven rain and which repairs are worth doing versus which ones just delay the inevitable. We are fully insured with general liability and workers' compensation, and we treat every property like it is our own.

Our services in Ravenel

How a Job Works in Ravenel

Step 1: You call (843) 804-4445 or request a free estimate, and we schedule a time to walk the roof with you. We look at the panels, fasteners, flashing, and the ground drainage around the foundation. You get a written scope and a clear price before anything starts.

Step 2: Once you approve, we pull the required roofing permit through the local building department (rules vary by jurisdiction, so we verify before we order materials). On most Ravenel jobs, the work itself is straightforward: tear-off or retrofit, new underlayment, and panel installation. If your home is in an HOA or a historic review area, we coordinate the paperwork and color approval so you are not stuck in the middle.

Step 3: We clean the site daily, magnet-sweep for nails, and do a final walkthrough with you. We do not leave until you have seen the finished roof, the flashing details, and the cleanup, and we haul away every bit of old material.

Pricing in Ravenel depends on square footage, roof pitch, how many layers are coming off, and how accessible the property is. As a ballpark, corrugated and ribbed panel roofing starts around $5.50 per square foot, metal roof over shingles (retrofit) starts around $7 per square foot, and full installation starts around $8 per square foot. Standing seam starts around $10 per square foot, and metal shingle or stone-coated steel starts around $9 per square foot. Repairs and leak fixes start around $450, screw replacement and re-fastening starts around $750, and flashing, chimney, or skylight work starts around $600. Storm and wind damage inspections are free. The best way to get a real number for your Ravenel home is to call (843) 804-4445 and set up a free estimate.

My brick ranch off Parkers Ferry Road has an old corrugated metal roof with rusted screws. Can you repair it or does it need a full replacement?
We see this a lot on older Ravenel homes. If the panels are still sound and the rust is isolated around fasteners, screw replacement and re-fastening (starting around $750) plus new neoprene washers can buy you years. If the panel ribs are rusted through or the underlayment is shot, a retrofit over the existing roof or a full replacement is the better call. We will tell you straight after a free inspection.
A storm just peeled back panels on my roof near the Ravenel Depot. How fast can you get out there?
Storm and wind damage calls get priority. We offer free inspections for storm damage and can usually get to Ravenel properties within a day or two of your call, sometimes same day depending on volume. Call (843) 804-4445 and we will schedule a time to tarp or secure the roof if needed and give you a written repair estimate.
What is the typical cost to replace a metal roof on a 1,500 square foot home in 29470?
For a simple gable roof in that size range, corrugated or ribbed panel replacement often lands in the $8,000 to $12,000 range, and standing seam runs higher, roughly $15,000 and up. Pitch, number of penetrations, tear-off layers, and whether you need new decking all move the number. We give you a fixed written price after a free on-site measure.
Do I need a permit to re-roof my house in Ravenel, and who handles it?
Yes, a roofing permit is commonly required for a full replacement or re-roof in Ravenel and the surrounding jurisdictions. Thresholds, fees, and inspection requirements vary, so we verify the current rules with the local building department before work starts. We handle the permit application and inspections as part of the job so you do not have to chase it down.
My neighbor's oak limbs hang over my roof line. What are my options if a limb damages my metal roof?
South Carolina property law generally allows you to trim limbs that cross onto your side of the property line, but you should not damage the neighbor's tree, and local rules can vary. If a limb has already punctured a panel, we can repair or replace the affected section and document the damage for your insurance claim. We never promise coverage, but we do provide the photos and written scope your adjuster will ask for.
Are you fully insured for work on my Ravenel property?
Yes. Charleston Metal Roofing carries general liability insurance and workers' compensation coverage for our crew. We are happy to provide a certificate of insurance before we start, and we recommend asking any contractor you hire in Ravenel for the same.
What maintenance should I do on a metal roof in Ravenel between storms?
Keep the valleys and gutters clear of pine needles and oak leaves, especially before hurricane season. Check for lifted or missing screws after any big blow, and look at the flashing around chimneys and skylights once a year. A metal roof coating or painting (starting around $2.50 per square foot) can extend the life of an older panel roof. If you are not comfortable on the roof, call (843) 804-4445 for a free inspection.
Why choose us?

Trusted professionals in Charleston

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Charleston

All your work handled by qualified professionals in Charleston

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

196+ Verified Client Reviews in Charleston

⭐⭐⭐⭐⭐ 4.9/5 · 196 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Charleston · Response within 24h · No commitment · ☎ (843) 804-4445

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Charleston ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm