Serving the Charleston area  ·  (843) 804-4445  ·  Open Mon-Sun 7am-7pm
📞 (843) 804-4445 Free Quote

Metal Roofing in Goose Creek, SC (29445) · Local Professionals

Charleston Metal Roofing · Fast response in Goose Creek and the Charleston area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+196Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Goose Creek is a city of practical, hardworking neighborhoods, from the established streets near the old depot to the sprawling subdivisions off Red Bank Road and Highway 52. Most of the homes here went up between the 1980s and 2000s, with large, simple shingle roof planes that take a beating from Lowcountry sun and summer storms. If you live in one of those houses, you already know the drill: another round of shingle repairs, another batch of granules in the gutters.

That is exactly why homeowners in Goose Creek (29445) call Charleston Metal Roofing. We specialize in metal roof installation, repair, and replacement, and we understand the specific challenges of roofing here, from the humid heat that cooks asphalt shingles to the afternoon thunderstorms that test every fastener. Whether you are near the Goose Creek Reservoir or off St. James Avenue, we can help you decide if a metal roof over shingles or a full replacement makes sense for your home.

Metal Roofing in Goose Creek (29445)

Goose Creek sits on relatively flat, sandy Lowcountry ground, and many subdivisions here were built with drainage swales and tight lot lines in mind. That means roof access can be tricky, especially on two-story homes where the pitch is steep and the yard is small. We plan our staging carefully to protect your landscaping and your neighbor's property. The bigger issue is the housing stock: thousands of homes in Goose Creek have architectural shingle roofs that are now 15 to 25 years old, and the combination of intense UV, heat, and humidity has them curling, cracking, and losing granules fast. That is why metal roof over shingles (retrofit) and full metal roof replacement are our most requested services here. We also see plenty of wind-lifted panels and failed fasteners after summer squalls, and we handle those repairs quickly to prevent water intrusion.

Our team has worked on roofs across Goose Creek and the surrounding Charleston area, from simple ranch homes to larger two-story properties. We know the local building department's permit requirements and can help you navigate any HOA design rules if your neighborhood has them.

Our services in Goose Creek

How a Job Works in Goose Creek

Step 1: You call us at (843) 804-4445 or request a free estimate online. We schedule an on-site assessment at your convenience, usually within a few days. We inspect your existing roof, take measurements, and discuss your options, whether that is a repair, a retrofit over your current shingles, or a full replacement. You get a clear, written estimate with no surprises.

Step 2: Once you approve the scope, we pull the necessary permits from the City of Goose Creek or Berkeley County, depending on your address. We order materials and schedule your project. On installation day, our crew arrives early, protects your driveway and landscaping with tarps, and gets to work. If your home is in an HOA, we coordinate any required approvals before we start, so there are no delays.

Step 3: When the work is done, we do a thorough cleanup, including a magnet sweep for nails. We walk the roof and the ground with you to make sure you are satisfied, and we do not leave until your property is clean and your questions are answered.

Pricing for metal roofing in Goose Creek depends on the size and complexity of your roof, the material you choose, and whether we are repairing or replacing. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. If you want to save by going over your existing shingles, our retrofit option starts at $7 per square foot. Repairs, including leak fixes, start at $450, and screw replacement or re-fastening starts at $750. We also offer free estimates for storm and wind damage inspections. Call us at (843) 804-4445 to get a precise quote for your home.

My house is in one of the older subdivisions off Red Bank Road, and the shingles are original from the 1990s. Can you put a metal roof right over them?
Yes, in many cases we can. Metal roof over shingles (retrofit) is a popular option in Goose Creek because it saves you the cost of tear-off and disposal. However, local code limits how many layers you can have, so we will check your current roof and confirm whether a retrofit is allowed. If not, we will recommend a full replacement.
A storm just blew through Goose Creek and lifted some panels on my roof. How fast can you get out to repair it?
We prioritize storm damage calls. In most cases, we can inspect your roof within 24 to 48 hours after you call (843) 804-4445. If there is active leaking, we can often perform temporary emergency repairs to prevent further damage until a permanent fix is scheduled.
What is the typical cost to replace a shingle roof with metal on a 2,000 square foot house in Goose Creek?
For a 2,000 square foot home with a standard pitch and simple roof lines, you can expect a metal roof replacement to start around $18,000 to $22,000, depending on the metal type and accessories. A retrofit over existing shingles might be closer to $14,000. We provide a detailed, itemized estimate after inspecting your roof.
Do I need a permit from the City of Goose Creek to install a metal roof?
Yes, a roofing permit is typically required for a full replacement or re-roof in Goose Creek. Permit fees and inspection requirements vary, so we handle the application and coordinate inspections with the local building department. We will make sure your project complies with all applicable codes.
My HOA has rules about roof colors and materials. Can you help me get approval for a metal roof?
Absolutely. We are familiar with many HOA requirements in Goose Creek and can provide the documentation and samples your HOA may need. We recommend submitting your request early, and we can coordinate with your HOA board to ensure the panel profile and color meet their guidelines.
Are you fully insured for roofing work in Goose Creek?
Yes, Charleston Metal Roofing is fully insured, carrying both general liability and workers' compensation coverage.
What maintenance does a metal roof need in Goose Creek's humid climate?
Metal roofs are low maintenance, but we recommend an annual inspection to check fasteners, seals, and flashing, especially after hurricane season. Keeping gutters clean and removing debris from valleys will help prevent water damage. We offer maintenance plans and can schedule a yearly check-up for you.
Why choose us?

Trusted professionals in Charleston

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Charleston

All your work handled by qualified professionals in Charleston

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

196+ Verified Client Reviews in Charleston

⭐⭐⭐⭐⭐ 4.9/5 · 196 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Charleston · Response within 24h · No commitment · ☎ (843) 804-4445

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Charleston ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm