Serving the Charleston area  ·  (843) 804-4445  ·  Open Mon-Sun 7am-7pm
📞 (843) 804-4445 Free Quote

Metal Roofing in Moncks Corner, SC (29461) · Local Professionals

Charleston Metal Roofing · Fast response in Moncks Corner and the Charleston area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+196Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Moncks Corner is where the Lowcountry turns rural, with older shingle roofs on lakeside homes and farm buildings that take a beating from sun, storms, and salt air. If you live off Highway 52 or near Lake Moultrie, you know the drill: shingles curling, fasteners backing out, and leaks showing up after a heavy summer downpour.

That's why homeowners in 29461 call Charleston Metal Roofing. We've replaced and repaired metal roofs on everything from brick ranches near Main Street to barns and sheds out toward Bonneau, and we know how to match the right panel to the property without overselling.

Metal Roofing in Moncks Corner (29461)

Moncks Corner sits at the edge of Lake Moultrie and the Francis Marion National Forest, so properties here range from small in-town lots to multi-acre rural tracts with outbuildings. The soil is sandy and low in places, which means drainage matters as much as the roof itself. We often find gutters undersized for the volume of rain that comes through during afternoon thunderstorms, and on older homes, fasteners that have worked loose from years of thermal movement. Access can be tight on older streets near the depot, while rural properties off Highway 52 and toward Bonneau may have long driveways and outbuildings that need their own roofing plan.

Our team has worked throughout Berkeley County, from the historic homes near the Santee Canal to newer subdivisions off Highway 17A. We know how to handle the wind uplift requirements here and how to work with the older roof structures you find on farmhouses and barns.

Our services in Moncks Corner

How a Job Works in Moncks Corner

Step 1: Call us at (843) 804-4445 or request a free estimate online. We'll set up a time to inspect your roof, whether it's a house in town or a barn out on a rural lot. We look at the decking, flashing, fasteners, and drainage, and we give you a written scope with options.

Step 2: Once you approve the scope, we pull the permit with the local building department and schedule the work. On tighter in-town lots, we stage materials carefully to keep driveways clear. For rural properties, we coordinate delivery and access. If your home is in an HOA or historic district, we help with the paperwork and color selections.

Step 3: After installation, we clean the site thoroughly, haul away old materials, and walk the roof with you. We don't leave until you're satisfied and we've shown you how the new system performs.

Pricing in Moncks Corner depends on the size and pitch of your roof, the condition of the decking, and how accessible the property is. For a typical ranch or bungalow, metal roof replacement often starts around $9 per square foot, while corrugated and ribbed panel roofing for barns or outbuildings starts at $5.50 per square foot. Standing seam runs about $10 per square foot, and repairs like leak fixes or flashing work typically start at $450. We give you a clear, written estimate before any work begins, and we're happy to walk you through the numbers. Call (843) 804-4445 for a free estimate.

My house near Lake Moultrie has an older shingle roof that's starting to curl. Is metal roofing a good fit for this area?
Yes. Metal roofing handles the humidity, salt air, and heavy rain we get around the lake much better than asphalt shingles. We often recommend corrugated or standing seam panels for lakeside homes because they shed water quickly and hold up to wind. We'll inspect your decking and insulation first to make sure the structure is ready.
A storm just knocked limbs onto my roof off Highway 52. How fast can you get out to Moncks Corner?
We prioritize storm damage calls and can usually get an inspector out within a day or two, sometimes same day depending on volume. Call (843) 804-4445 and we'll schedule a free inspection, document the damage for your insurance, and make temporary repairs if needed.
What does a metal roof cost for a typical three-bedroom ranch in Moncks Corner?
For a ranch around 1,500 to 2,000 square feet, a full metal roof replacement often falls in the range of $9 to $12 per square foot installed, depending on panel type, decking repairs, and access. Corrugated panel roofing for a barn or shed is less, starting around $5.50 per square foot. We provide a detailed estimate after inspecting your roof.
Do I need a permit to replace my roof in Moncks Corner, and how long does it take?
Yes, the Town of Moncks Corner generally requires a roofing permit for a full replacement. The permit process usually takes a few business days, and we handle the application and inspections for you. Requirements can vary, so we always confirm with the local building department before scheduling.
My neighbor's oak tree hangs over my property line. Can I trim it to protect my new metal roof?
In South Carolina, you generally have the right to trim branches that extend over your property line, but you should not damage the tree or trespass. We recommend talking with your neighbor first. If your HOA has rules about tree maintenance, check those too. We can advise on roof clearance and flashing where branches are close.
Are you fully insured for work at my Moncks Corner property?
Yes, Charleston Metal Roofing carries general liability insurance and workers' compensation coverage. We're happy to provide proof of insurance before we start any job, so you're protected if anything happens on your property.
What maintenance does a metal roof need in Moncks Corner's climate?
Metal roofs are low maintenance, but in our humid, storm-prone area, we recommend an annual inspection to check fasteners, seals, and flashing. After major storms, look for loose panels or debris. Keeping gutters clear is important because of our heavy rain. We offer inspection and maintenance plans to catch small issues before they become leaks.
Why choose us?

Trusted professionals in Charleston

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Charleston

All your work handled by qualified professionals in Charleston

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

196+ Verified Client Reviews in Charleston

⭐⭐⭐⭐⭐ 4.9/5 · 196 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Charleston · Response within 24h · No commitment · ☎ (843) 804-4445

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Charleston ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm